RunCam 2 HD Low Latency Wi-Fi USB Power Removable Battery Camera - ORANGE

Manufacturer: Rakon Heli Co., Ltd. Brand: Rakon

Rakon Blade 230S / 250CFX CNC Head Combo 02 (Green) - 230S012-G Included:1 x (SKU: 230S010) CNC AL Main Rotor Hub Set ($24.99)1 x (SKU: 230S030) CNC AL Main Blade Grip Set ($27.99)1 x (SKU: 230S178) CNC AL Swashplate Set ($29.99)

Manufacturer: Goolsky Brand: Goolsky Color: White

Specifications: Brand: JJRC Model: H12CH Remote controller: Mode1 & Mode 2 (right & left hand throttle) Flight time: approx 7mins Quadcopter charge time: approx 100mins Control distance: approx 200m Quadcopter battery: 3.7V 750mAh lipo battery (included) Transmitter battery: 4 * AA Battery (not included) Functions:ascend/descend/forward/backward/side flying/360°rolling action/hover/1080P HD camera/Speed switch mode/Night light/CF mode/One-key return/Set-height mode Item dimensions: 305 * 305 * 90mm Package Information: Package size: 37.8 * 28.5 * 9cm / 14.9 * 11.2 * 3.5in Package weight: 820g / 1.81lb Brand gift box package Package List: 1 * JJRC H12CH RC Quadcopter 1 * Transmitter (Mode1 & Mode 2) 1 * 3.7V 750mAh lipo battery 1 * 5.0MP HD Camera 2 * Landing Gear 4 * Spare Propeller Blade 4 * Protect Cover 1 * Screwdriver 1 * Card Reader 1 * USB Cable 1 * English Manual FAQ of the aircraft: 1.The aircraft fail to connect with transmitter. Before binding, make sure battery is full. Then turn on the drone and the transmitter, the time between these two operation should be finished in 2 seconds. 2.One or more motors don't work. Drone should stay on a flat surface during the binding, or motor is damaged. 3.Battery problems (can't be charged, swelling, etc) Battery damaged, suggested to change a new one. 4.Accessories missing. Check gift box package inside and outside carefully. Contact custom service. 5.The aircraft is out of balance (can't fly, deviation, spinning on the ground). Check the propeller is installed in the right way.

Manufacturer: ESKY Brand: Esky

E-Sky CO-Douphin 4Ch RTF Micro RC Helicopter --- NEW!

Manufacturer: Autonomous Brand: Autonomous Model: D4 Color: Black

Nucleus is the perfect entry-level drone kit. While offering an immersive, fun and magical flying experience - it also makes it super easy to capture and share the world from all kinds of impossible photography angles. The 2mp hd camera is perfect for capturing the best moments in high definition and fpv live streaming. Flying time: 6 - 8 minutes. Helicopter size: 13 x 13 x 4.13 In / 32 x 32 x 10.5 Cm. Helicopter battery: 3.7V 500 mah li-polymer battery. Controller battery: 4 1.5V aa battery (not included). Charging time: about 90 - 120 minutes (usb charging). Control distance: about 164 meters. Support phone type: iOS / android. Real-time shooting function: yes. Headless mode: yes.

Manufacturer: Syma Brand: SYMA

Syma introduces its newest S33 3 channel coaxial helicopter! If you are familiar or have flown the S fleet of choppers, you'll know exactly how stable it is! The new S33 is equipped with all the awesome features you'll come to expect from Syma with new features such as flashing lights, bigger battery, and a 2.4ghz LCD transmitter. The S33 is 3 channel helicopter. This means that it can fly in 6 directions. It will maneuver Up/Down, Forward/Backward, and rotate clockwise and counterclockwise. The size of this chopper is suitable for indoor flight in smaller or confined spaces. Its coaxial rotor design is naturally stable in flight. Even beginners will find that it will control well. The built-in gyro is able to lock the heading and prevents continuous rotation of the helicopter chassis. The gyroscope is powerful and with the trim adjustment on the transmitter it can be adjusted in flight. What's impressive is that the helicopter can hover in the air with your hands free from the transmitter. The radio system included in this package uses 2.4ghz frequency. With the use of spread spectrum technology, the control distance of the chopper is improved. Unlike infrared systems, you can fly this chopper without having to worry about glass, mirrors, or sunlight interfering with the signal. This type of frequency also allows more helicopters to be flown at the same time. The transmitter also has an LCD screen that displays trim and flight states of the helicopter. A high and low speed switch on the transmitter allows the pilot to control the throttle rate of the chopper for greater or less sensitivity. A 7.4v 1500mah Lithium Polymer battery provides good power and about 6-8 minutes of flight time. Included in Box: S33 3 Channel Helicopter Charger Screwdriver 2.4ghz Transmitter (4 AA Batteries not included) Operating Instructions

Manufacturer: Mountaininc Brand: SYSAMA

Packing List: 1 x Aircraft 1 x Remote controller 1 x Battery 1 x Plug power adapter 1 x Card reader 1 x Webcam 1 x Memory card(2GB) 1 x Screwdriver 4 x Blades 4 x Protect covers 2 x Landing gears 1 x English / Chinese user manual

Manufacturer: Protocol Brand: Protocol

DRONIUM ONE - WIFITM RC DRONE WITH LIVE STREAMING VIDEO Dronium One WiFi with its live streaming video capability brings an exciting new dimension to experience with aerial videography! Choose to fly using either the 2.4 Gig remote control included, or via wifi on your smartphone or tablet using our free downloadable App. Dronium One WiFi is easy to maneuver expertly and can even perform banked turns and 4-way 360° flips on command! Box Includes: Drone with Camera Remote Control with Phone Mount USB Card Reader USB Cable Charger 4 Removable Blade Guards Instruction Manual Spare parts: Blades, Screwdriver. NO FAA REGISTRATION REQUIRED ON THIS DRONE.

Manufacturer: Rakon Heli Co., Ltd. Brand: Rakon

Rakon CNC AL and CF Upgrade Kit (Silver) - Blade Inductrix 200 1. Description:- Material: Aluminum alloy, 3K Pure Carbon Fiber and Delrin. - Hardware: Steel and Stainless Steel.- Compatible and replacement the stock kit.- With this kit you can use another battery (not stock), battery mount dimension upto: W50xL100xH30mm.- Optimized for weight and durability. 2. Usage:- Use for Blade Inductrix 200. 3. Weight:- Stock Plastic Kit: 33.32(g) = 1.17(oz). - CNC AL and CF Upgrade Kit: 38.98(g) = 1.37(oz). 4. Package Included: 1 x CNC AL and CF Upgrade Kit (included hardware). 1 x 20x200mm Battery Strap.1 x Velcro Pads.

Manufacturer: ALIGN Brand: ALIGN

Specification: ●Shape: Symmetrical wing ●Length:600x55x7.15mm ●Width:12mm ●Shaft Diameter:4mm ●Weight:Approx 270g/set