ECX Temper 4WD Rock Crawler Brushed RTR Vehicle (1/18 Scale)

Manufacturer: General's Brand: GPTOYS

Note: The video is water, but waterproof rating of 4 male, do not your car submerged in the water, to prevent short-circuiting of electronic devices Baptist bad happened. Specification: Also launching will be a little rusty screws, you need to spray some anti-rust oil. The basic parameters are as follows: Motor 540 power motor 40A electronic variable speed control governor Battery 7.4V 1500mAh lithium battery magnification Frequency 2.4G HZ Remote distance ≥ 100 M Class full-scale remote synchronous control system (gun control) Remote control for about 15 minutes Charging time is about 3.5 H Charger 7.4V = 800mAh have distribution Remote Control Battery 4 * 1.5V AA batteries (not included) Package included: The car is equipped with the following 20 kinds of intimate small parts: Name Quantity Common chassis manual * 1 P601 car shell specification * 1 P601 car shell sticker * 1 7.4V Balance Charger * 1 7.4V 1500mAh Lithium Battery * 1 1.5mm hex wrench * 1 2.0mm hex wrench * 1 2.5mm hex wrench * 1 Cross wrenches (small) * 1 Car shell latch (small) * 2 Car shell latch (large) * 2 26T motor gear * 1 30T motor gear * 1 Fa Lanni Long locknut * 1 M3 * 4 screws drilled tablets * 1 Nylon cable ties 3 * 200mm * 2 Shock absorbers adjust buckle suit * 3

Manufacturer: Hudy Brand: HUDY

This is a set-up System for all 1/10 touring cars from Hudy. Fits all 1/10 nitro and electric touring cars. Set-up system is used for adjustment of: camber & camber rise caster front and rear toe steering throw symmetry Main features: backlash-free, wobble-free mounting fully ball-bearing equipped set-up stands (12 high-precision ball-bearings) ultra-smooth, ultra-precise movement and operation CNC-machined, hard coated high-grade aluminum set-up stands CNC-machined, tough acrylic plastic toe/steering plate precision engraving for instant, reliable readings

Manufacturer: Exceed RC

The Terrain Truck platform consists of a shaft driven? 4 wheel-drive system, geared differentials, aluminum upper deck chassis, aluminum drive shaft, metal axes and oil-filled shock absorbers with progressive springs to tame any terrain. The steering mechanism is handled by a high torque servo allowing aggressive all terrain driving. The entire chassis is enclosed in a durable composite roll cage with scale driver and co-pilot included. Dirt, sand, snow, mud, rain, this truck will smash through it all. This truck is ready to run. It includes an Exceed RC 2.4ghz radio control system for optimum driver and machine communications. It also included a 7.2v 1800mah Ni-MH battery and charger. Features: 1. All terrain treaded tires and off-road style wheels 2. Covered spur gear cover 3. Threaded, oil-filled, adjustable shocks 4. 6061-T6 aluminum shock towers 5. Front and rear metal geared differentials 6. Brushed 550 Motor 7. Li-Po compatible Brushed ESC 8. 4WD shaft drivetrain Specifications: Length : 435mm Height : 160mm (body excluded) Width : 315mm Wheel Diameter : 118mm Wheel Width : 52mm Wheel Base : 275mm Weight : 2120g Gear Ratio : 11.1 : 1 Ground Clearance: 33mm Motor: RC550 Servo: 6KG (Waterproof) Battery: Ni-MH 7.2v 1800mah Package Contents: 100% Assembled 1x 1:10 Exceed Truck 1x 2.4Hz Transmitter/Receiver 1x Battery Charger (100-240V) 1x 7.2v 1800mAh Ni-MH battery 1x Instruction Manual Required to Run: 4 AA Batteries for 2.4ghz Transmitter

Manufacturer: NEW RAY Brand: New Ray

Features. John Wayne Memorabilia Long Hauler Diecast Truck.. These New Ray toy trucks come with Diecast cabs and high impact plastic parts.. Style 1.. Pack of 6.. Item Weight - 20 lbs.

Manufacturer: Exceed RC Brand: Exceed RC

The Mini MadBeast is equipped with some serious performance bits that make this 1/18 scale truck a blast to drive. At just 10 inches in length this little monster truck will turn any living room or yard into a monster truck playground. The Mini MadBeast is ready to run which means it is equipped with a 2.4ghz radio system for precise control of the vehicle. You also wont have to worry about "the other guy's" radio and if there will be radio interference. The 2.4ghz frequency jumping system allows this 2.4ghz radio system to stay connected and avoids interference which may cause you to loose control. The heart of the MiniBeast lies in a 370 high performance motor that distributes the muscle to pull this truck through tough obstacles. Sticky off-road treaded rubber tires mounted on light weight wheels allow the truck to find traction on laminated floors, carpet, grass, or dirt. Independent front and rear suspension allow the tires to maintain traction through varying terrain. The shaft driven 4 wheel drive system delivers power to all four corners providing outstanding handling character. No bushings are used in this truck, fully sealed ball bearings are installed in the hubs and steering mechanism for smooth and precise movement. From the list of performance bits you are now starting to understand that this little beast is not your average electronic retail store truck. Features: Full sealed Ball bearing set One piece tie-rod 370 high performance motor High efficiency steering servo 7.2V 1100mAh Ni-Mh Battery Ni-Mh Charger Specifications: Length: 230mm Width: 170mm Height: 110mm Wheelbase: 160mm Weight: 440g Gear Ratio: 8.04 Required to Run: You will need 4 AA batteries *Note this truck is equipped with an Ni-Mh battery. Please only use Ni-Mh batteries and Ni-Mh compatible chargers.

Manufacturer: Velocity Toys Brand: Velocity Toys

Package Includes: S-Track Matrix RC Truggy Rechargeable Battery with Charger Remote Control with Battery

Manufacturer: Tacon Brand: tacon

The Tacon Valor ready to run package also includes a 2.4ghz radio system. With frequency hopping technology, interference is a thing of the past. No longer do you have to worry about your specific channel. The radio system will automatically take care of that for you while you are focused on handling this beast of a machine. Features: 1. Tacon design treaded tires 2. Aluminum-capped, oil-filled, coil-over, 6061-T6 adjustable shocks 3. Thick composite shock towers 4. Front and rear metal gear differentials 5. LiPo Ready ESC 6. 380 Brushed Motor 7. 4WD shaft drivetrain Specifications: Scale: 1/14 Tacon Valor Monster Truck Length: 280mm (11in) Width: 340mm (13.4in) Height: 132mm (5.2in) Wheelbase: 185mm (7.3in) Weight: 0.90kg (1.9lbs with battery) Tire Type: Tacon Monster Truck Chassis: Composite Motor or Engine: 380 Brushed Steering Servo: Solar 655 Gear ratio: 8.23 Speed Control: Brushed Lipo Ready Radio: 2.4GHz Technology Batteries: 7.2V NiMH with 3.5mm gilded round connector, Charger included Shock Type: Aluminum capped, threaded, oil-filled, coil-over Package Contents: 100% Assembled 1x 1:14 Tacon Valor Truck 1x 2CH 2.4Hz Transmitter 1x Battery Charger (100-240V) 1x 7.2v 1100mAh Ni-MH battery 1x Instruction Manual Required to Run: AA Batteries for Transmitter

Manufacturer: Horizon Hobby Brand: E-flite Model: EFLG500

Manufacturer: Hudy Brand: HUDY Model: 108905

This is the Hudy Universal Exclusive Set-Up System, and is intended for use with all 1/10 off road vehciles with 4.7mm wheel axles. This system supports both pin and hex drive type wheel adapters, and is used for super-precise measurement and setting of front/rear camber, toe, steering throw, and caster. Backlash-free, wobble-free mounting of the full ball-bearing equipped set-up stands (12 high-precision ball-bearings) provides ultra-smooth, ultra-precise movement and operation.     These Set-up stands are CNC-machined, hardcoated high-grade aluminum, while the toe/steering plate is CNC-machined from tough acrylic plastic. All the components feature precision engraving for instant, reliable readings. Includes handy set-up nuts for quick assembly/disassembly. Delivered in handy foam packing for comfortable and safe storage and transport. NOTE: The toe plate included with the 1/10 off road setup system is not wide enough to fit 1/10 short course trucks. RC ...