Product Details
4.6 out of 5 stars with 25 reviews

FPVDrone Matek PDB-XT60 Power Distribution Board BEC-5V/2A 12V/0.5A with XT60 Plug for DIY Quadcopter Helicopter


List Price
$9.89
Our Price
$9.89
Savings
0% OFF
* Pricing Information Updated Less Then A Minute Ago

Availability:

In Stock


Select Quantity:


  Add to Cart

Description:
General:
-Input voltage range (3S-4S LiPo operation): 9 - 18V DC
-Regulated 5V and 12V outputs
-LED power indicators ( 5V & 12V outputs )
-6 ESC outputs & 1 pair VCC/GND pads
ESC outputs:
-Continuous current: 25A*4 or 15A*6
-Peak current (10 seconds/minute): 30A*4 or 20A*6
BEC 5V output:
-Designed for RC Receivers, Flight controllers, OSD, and Servos.
-DC/DC synchronous buck regulator.
-Voltage: 5.0 +/- 0.1VDC
-Continuous current: 2 Amps (Max.2.5A 10s/minute)
-Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
-Short-circuit tolerant (5 seconds/minute)
BEC 12V output:
-Designed for Video TX or FPV camera with linear regulator.
-The battery should be 4S LiPo (13~18V DC)
- Voltage: 12.0 +/- 0.3VDC
-Continuous current: 500mA (Max.0.8A 5s/minute)
-Short-circuit tolerant (2 seconds/minute)
BEC 12V @ 3S LiPo
-Output voltage= 3S LiPo voltage -1V Physical:
-Dimensions: 36 x 50 x 4 mm (without XT60)
-Mounting: 30.5 x 30.5mm, Φ3mm
- Weight: 7.5g(w/o XT60), 11g(w/ XT60)
Features:
2oz copper, 4-layers &1.6mm PCB.
Built-in XT60 Socket
Total 6 pairs ESC solder tabs are fit for H or X type frame 5V & 12V Output LED
indicators & Short circuit tolerant
Package included:
1 x Matek Systems PDB-XT60
  • The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers PCB.

  • It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised regulated DC 5V outputs linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.

  • The PDB-XT60 offers a Authentic Amass XT60 plug to connect the LiPo pack conveniently.

  • 4-layer PCB Board, high current power and BEC stratification, avoid ground disturbance BEC power current;

  • This board makes the wiring nice, with the bonus of having the XT60 option. Stacked right on top of the CC3D with plenty of room.

Product Information   Specifications for FPVDrone Matek PDB-XT60 Power Distribution Board BEC-5V/2A 12V/0.5A with XT60 Plug for DIY Quadcopter Helicopter Below:

Manufacturer Matek
Brand Matek
UPC 757450335984
Package Weight 0.04 pounds
Package Size 4.49 x 0.51 x 0.51 inches

Join Our Community!

Like what you see? Get a FREE account and start posting, sharing, and discovering more!

Have Questions? Contact Us!

Find out the answers to your questions by contacting us. We look forward to hearing from you!