YoCoo TL90 LCD Display Digital Pitch Gauge Screw Pitch Gauge with Gyro Sensor for RC Airplane Helicopter ST250-800 Size

Manufacturer: ProgressiveRC Brand: ProgressiveRC Model: AC-PARBUC

Our parallel charge leads allow you to charge up to six battery packs simultaneously. Constructed from the highest quality materials, they give you the best connection possible every time you charge your batteries. This unique design serves as both a charging and balancing cable for up to 6 of your 2S battery packs. Connect to your batteries with the JST-PH connectors, as used in the Beast UMX or Sbach 342 UMX. Connect to the charger's main output with 4mm banana plugs, and to the balance port with a standard 2S JST-XH balance connector. 4" of top-quality silicone wire gives you the flexibility you need to easily get everything connected. Specifications Input Charge Connector: Male 4mm Banana Plug Input Balance Connector: Male 2S JST-XH Output Connector: 2S Female JST-PH Wire Type: 24 AWG Silicone Charge Lead, 26 AWG Silicone Balance Lead Length: 4"

Manufacturer: General's Brand: GPTOYS Color: 15-ZJ05

Manufacturer: Tamiya Brand: Tamiya

Mini 4WD Multi Chassis Balance Weight TAM15292

Manufacturer: Hot Racing Brand: Hot Racing

Hot Racing complete aluminum chassis for use on the Losi 1/36 Micro-T vehiclesFEATURES: - CNC machined 6061 aluminum construction- Anodized silver with blue anodized support components- Spring loaded battery door for quick battery pack access- Extra material is milled from components to reduce weight- Fully countersunk bottom screw holes- Less flex for improved handling response - Direct fit comes with all modification parts, even an on/off switch mountYOU WILL RECEIVE: - One (1) silver aluminum upper chassis plate- One (1) silver aluminum lower chassis plate- Aluminum blue anodized support components- One (1) heat shrink tubeREQUIREMENTS: - A heat source to shrink the wrap around the Receiver/ESC unit to keep the dust out the Receiver/ESC (heat gun or hair dryer may be used as a heat source)- Tape up the on/off switch before installing the switch in the aluminum switch mountSPECIFICATIONS: - Total length: ~92mmdescription revised by: SN September 2, 2015

Manufacturer: MIP Brand: MIP

Rear Aluminum Race Duty CVD Kit Slash 4X4/Rally

Manufacturer: Redcat Racing Brand: Redcat Racing Model: 70117H

Redcat Racing hot plug for low-nitro fuel and sport use. Can be used in all NITRO: Lightning, Tornado, Tsunami, Volcano, Sandstorm, Maelstrom, Landslide, Twister, Typhoon, Hurricane, Monsoon, Avalanche, Tremor XTR, Tremor XTG, Tremor XTB, and Tremor XTK models.

Manufacturer: Zhencheng Brand: Zhencheng Color: Red

* Made of high quality plastic and rubber,good anti-crash performance car,has good suspension and it is sturdy,durable * Inside simulation design,with 1 driver in the car,give you a great surprise! * Rubber tire,big foot design with a good grip to deal with considerations * 4 wheels drive, super sport,more stable and faster than 2 wheel drive one * A Hobby model Level truck, with toy's price Specifications: Color: Red Size: 1 : 18 Scale, 12 x 7.1 x 4.8 inches Radio system: 2.4Ghz, strong anti-jamming capability,several cars can be played at the same timeSpeed: 20km/h,12.4 MPH,very fast,gives you more fun when playing Controlling Distance: About 60 meters Charging Time:about 2-3 hoursUsing Time:about 20 minutesBattery for Controller: 2 x 1.5V AA Batteries(Included) Full Proportional 4WD rc truck is ready to run right out of the boxNote: Wheel calibration is manual and it is underneath of the car the white plastic dial.Package Included:1 x Truck 1 x 2.4GHz Transmitter1 x Li-ion 6v 700mAh battery pack for truck2 x 1.5v AA battery for Transmitter1 x 6v Charger

Manufacturer: RCScrewZ Brand: RC Screwz Model: arrm010

Stainless Steel Screw Kit for the Arrma Senton SC 6s......RCScrewZ Stainless Screw Kits are 100% complete. Your new kit will include everything needed to do a full conversion and more. Stainless Steel Screw Kits are far superior to the screws that come stock with your RC. Our kits are made with the best stainless steel money can buy. No more bent, rusted, or corroded screws. Never worry about stripped heads again. You will not find a better screw kit for your RC at any price and we Guarantee it. If for any reason your not 100% satisfied with your kit, return it and we will send you a full refund for the price of the kit. All RCScrewZ Kits include: **All socket screws + Extras, **Button Screws + Extras, **Flat Head Screws + Extras, **Set Screws + Extras, **Nuts + Extras, **Washers + Extras, **Bondhus Short Arm Hex Wrenches All Sizes, **Quality Reusable plastic pit case. Come visit us direct at RCScrewZ and browse our inventory of over 4000+ screw/bearing kits!!!!

Manufacturer: GoolRC Brand: GoolRC Color: Blue

Features: 4WD 2.4G RC Car Short Course Truck style. 1/18 Scale suitable for indoor and outdoor control. High quality car body. Four-wheel independent suspension. Two Differentials. Come with 4-wheel shock absorbers. With Proportional Steering function. 45Km / H for the high speed. 100 metre control distance.Specification: Vehicle Length: 253mm Vehicle Width: 200mm Height: 115mm Wheelbase: 165mm Wheel diameter: 71mm Wheel width: 40mm Motor: 390 Transmitter frequency: 2.4GHZ Transmitter battery: 4 * AA(not included) Battery Power: 7.4V 1100MAH Run time: about 10 min Charging time: about 150min Control distance: more than 100m Servo: 16g Color: Blue / Black OptionalPackage information: Package Size: 30 * 21.5 * 21.5cm / 11.8 * 8.5 * 8.5in Package Weight: 1623g / 3.6lb Gift box package Notice: This RC model is not a toy and is not suitable for children under 14 years old, keep it away from children. Carefully read the instruction before any use, if you are a beginner, it's advisable to be assisted by an experienced adult.Package list: 1 * Wltoys A979 RC Car 1 * 2.4G Transmitter 1 * US Plug Charger 1 * 7.4V 1100mAh Lipo Battery 1 * English Manual