MJX X600 2.4G 6 Axis Gyro Headless 3D Roll One Key Return RC Hexacopter

Manufacturer: Double Horse Model: 9116

PLEASE NOTE: THIS HELICOPTER IS NOT FOR BEGINNERS. IT IS NOT EASY TO FLY SINCE IT HAS A SINGLE BLADE.

Manufacturer: GoolRC Brand: GoolRC Color: Blue

Throttle limiter mode save your drone: With the help of throttle altitude limiter mode,it is easy to set the safe height,which will prevent the drone from fly-away.Throttle limit mode designed for protecting the safety of the beginners. Headless mode help you take off: By using Headless, no need to adjust the position of aircraft before flying,the direction will be the same as your remote controller. Specifications: Remote control: 2.4GHz / 4 Channels / mode 2 Gyroscope: Six axis Motor: Coreless motor Camera: 2.0MP HD camera Function: 360° Eversion, CF mode, up, down, left, right, forward, backward, hovering Remote distance: about 30-50m Battery for quadcopter: 3.7V 500mAh li-po Charging time: about 130 minutes Working time: 5-7 minutes Battery of remote controller: 4 * AA Battery (not included) After-Sales Service: Please feel free to contact us by email directly when any problem happens to you. No matter how serious the problem is, we will try our best to help you fix the problem, and make you satisfied with our service, don't worry. All emails will be replied in 24 hours, we will deal with your problem as soon as possible. Tips for beginner: 1. Please read the instruction manual carefully before flying the drone. RC drone is not a toy ,the suitable age is above 14 years old. 2. Matching the drone and controller successfully and installing the propellers on right position ,otherwise the drone will not take off. 3. If the drone is flying to on side dramatically or spinning while hovering ,please switch off the power of both controller and drone and then match the drone and controller again. 4. Avoiding overcharging and excessive discharging the battery

Manufacturer: Team Black Sheep Brand: Team Blacksheep

Team BlackSheep TBS Dominator Rx (5G8) This 5.8 receiver module is made specially for the Fatshark Dominators. Featuring custom, high-sensitivity 5.8 GHz receiver modules compatible with all 5.8 GHz systems sold to date. More specifically transmitters sold by HobbyKing, Foxtech, etc and out-of-the-box systems such as the SpyHawk FPV are supported, as well as all Airwave-compatible transmitters (e.g. ImmersionRC). Note: compatibility with Airwave is provided, but the quality will not be desireable. We suggest the use of BOSCAM video transmitters. Contents 5.8 GHz TBS Fatshark Dominator Receiver 5.8 GHz 5dbi RHCP Patch Antenna - designed by IBCrazy Quick Instructions Place the module into your Fatshark Dominator receiver. Toggle channel UP/DOWN within 1 second on the goggles to scan through all 40 channels for valid video signals. Toggle between bands by pushing (and holding) the golden button. The receiver will display the currently active band with the LED. 1 flash = BOSCAM Band A 2 flashes = BOSCAM Band B 3 flashes = BOSCAM Band E 4 flashes = Airwave 5 flashes = Race band Toggle channel within bands using the Fatshark channel select buttons.      

Manufacturer: Gartt Brand: GARTT Model: SV-008

Operating Voltage:DC6.0V-8.4V Size: 40.50*20*37mm Torque: 18Kg.cm at 8.4V 16Kg.cm at7.4V 13Kg.cm at 6.0V Speed: 0.07sec/60° at 8.4V 0.08sec/60° at7.4V 0.09sec/60° at 6.0V Weight: 68g Working Frequence: 1520us/333Hz, 900us-2100us Motor:Φ17mm Coreless Ball Bearing: 2BB

Manufacturer: Mastercraft Collection, LLC Brand: Mastercraft Collection, LLC Model: NC10204

The development for the Sikorsky S-76C+ began during the mid-70s. The goal of this development was to come up with a medium-built helicopter for corporate transportation. This utility helicopter featured FADEC dual engines and Honeywell EFIS. It also has suppression for noise, dampers for unnecessary vibrations, and a composite rotor. The initial prototype took its first flight in 1977 and was initially named as S-76 Spirit to honor the United States Bicentennial. However, the designation was taken out in 1980. The production for the S-76C+ continued until the year 2005.

Manufacturer: MAXBO Brand: MAXBO

Important Tips: 1.In order to use the RC Quadcopter correctly and make sure safety, please read the instruction book carefully before flying.2.The motors and circuit board will heat up with miseuse. Take a 10 minute cool down break between flights to ensure your parts last as long as possible. 3.To avoid being burnt up the USB Charger,it should be used under currents input 0.5A. 4.Don't push the throttle up hard directly. Adjust the throttle slowly to avoid damage caused by loss of control. 5.The weight of quadcopter is less than 0.5lb and no registration is required for this model on FAA.Specifications: Length: 400mm Width: 325mm Height: 80mm Tail Rotor Diameter: 137mm Weight: 130g Camera: 0.3MP HD Remote distance: 100 meters Flying height: 50 meters Charge Time: About 1.2 Hours Flight Time: 6~8 minutes Transmitter Battery: 3 x AA 1.5V (Not Included) Battery type: 3.7V 650mA lithium battery with protection board Package Include:1 x Quadcopter 1 x Transmitter (Cell Phone is not included) 1 x Battery 1 x USB Charger 4 x Blades 1 X English Manual

Manufacturer: DJI Brand: DJI

All-In-One Design For entry-level enthusiasts, DJI now brings out the most cost-effective solution, the NAZA-M Lite flight control system. As the simplified version of NAZA-M, it inherits the high reliability and stability of NAZA-M. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude, attitude and there SPECIFICATION: Features: All-in-One Design Advanced attitude stabilize Algorithm Multiple flight control mode/intelligent switching GPS Module Available/Accurate Position hold Intelligent Orientation Control (IOC) Failsafe mode Low voltage protection Motor Arm and Motor Dis-arm Support Futaba S-Bus and PPM receiver Supported multi-rotor types Built-In Gimbal Stabilization Function Remote Adjustment fore can be used for autopilot/automatic control. DJI Naza-M Lite Features - All-in-One Design - Advanced attitude stabilize Algorithm - Multiple flight control mode/intelligent switching - GPS Module Available/Accurate Position hold - Intelligent Orientation Control (IOC) - Failsafe mode - Low voltage protection - Motor Arm and Motor Dis-arm - Support Futaba S-Bus and PPM receiver - Supported multi-rotor types - Built-In Gimbal Stabilization Function - Remote Adjustment Package included: - DJI NAZA-M Lite MC - DJI NAZA-M Lite LED - DJI NAZA-M Lite PMU - Cables

Manufacturer: CHINA Brand: Officeshop

Manufacturer: Ubad Brand: Ubad

UBAD 600mW Beast Edition 5.8GHz Mini-Video Transmitter - Cable The Beast Edition video transmitter is here to fill all of your video needs. With 600mW of power and 32 channels to choose from this transmitter will let you maximize your proximity flights near trees, buildings, and other objects. Specifications: 5.8ghz 600mw 32 Channels Weight: 14g 30x22x9mm 10cm - 90° SMA Bulkhead This will utilize an SMA antenna...