Immersionrc Duo5800v4 5.8ghz Receiver Race Edition

Manufacturer: 0 Brand: Unknown Model: 231 UA6

UDI Adapter for iPhone and Android Controlled RC Helicopter

Manufacturer: Z-Standby Brand: Generic Model: Q13586-A

Package Content: 1Pcs of CC3D Atom Flight Controller 1Pcs x 8 Pin Cable 1Pcs x 4 Pin Cable 1Set of V-Type Antenna Pedestal 1Set of Anti-Vibration Damper Set 4Pcs of Simonk 12A ESC 2Pcs of MT2204 2300KV CW Motor 2Pcs of MT2204 2300KV CCW Motor This CC3D Atom Is About Half the Size of the Regular Openpilot CC3D, But with the Same Functionality. Now You Can Get All the Great Features and Functionality of the Full Sized CC3D Flight Controller Board But At About 1/2 the Size! Features: the CC3D Provides a Crisp Feel When Flying Tricopters, Quads, Hexas, Octocopters, and Even Fixed Wing Planes. Powerful STM32 32-Bit Micro-Controller Running At 90Mips with 128KB Flash and 20KB RAM. 3-Axis High-Performance Mems Gyros and 3-Axis High-Performance Mems Accelerometer. 4 Layer PCB For Superior Electrical Noise Reduction and Flight Performance. Software Support For Windows, Mac and Linux. Direct High Speed USB Support with No Drivers Required. Spektrum Satellite Receiver Support. Futaba S-BUS Hardware Support. Innovative Flexi-Port Technology For Superior Port Flexibility. 4Mbits On-Board EEPROM For Configuration Storage. This Openpilot CC3D Atom Board Also Includes a High Quality, Protective Case. Optional Straight and Bent Pin 12A Simonk Speed Controller Specifications: - Continuous Current: 12A - Burst Current (10S): 15A - Li-Xx Battery (Cell): 2-3 - Dimension (L*W*H): 25mm x 20mm x 7mm - Weight Wires Included: 9 - BEC Mode: Linear - BEC Output: 1A/5V

Manufacturer: Double Horse Brand: Double Horse

Double Horse R/C Helicopter 9117

Manufacturer: QWinOut Brand: Qwinout

Attn: Customer Needs To Set HDMI Resolution To Auto On Camera, This Device May Not Support Those Cameras That Don't Have The Function Of Auto HDMI Resolution, As Soon As Auto HDMI Resolution Is Set Up, You Must Turn Off The Camera And Restart It, The Set Up Will Take Effect Finally. PAL and NTSC Will Do Nothing With The Converter, Only Resolution Ratio Will Influence Its Output. User Can Do DIY with Old Earphone Cables. for Those Customers Who Don't Need The Audio Track(Channel), It Would Be OK for Only Bringing Out GND and Video. VIDEO Output Resolution: 720*576 PAL    1) Most Importantly, Don't Connect The Converter or Any Cable to The Camera Before The Process. Set Up HDMI Resolution to Auto, Saved, Then Quit The Set Up Menu, and Turn off The Camera. 2) Connect The HDMI Converter or The Related Cable, Turn On The Camera, It Will Work Normally. 3) If No Image Is Appeared, Please Check and See If The Resolution Set up is On "Auto" State, That Is to Say, We Need to Check Whether The Step One is Completed and Saved or Not, and Then Start Working. If it Still Does Not Working, Please Repeat The Step 1). 4) For Those Very Special And Few Versions Of Cameras, According To Our Experience, Those Sony Cameras Sold In France, Needs To Set Up Pal, The Reason May Be Related With Its Firmware. The several possibilities for problem of no image: 1) Many customers normally would like to connect the converter with the camera first and then set up AUTO resolution, it is a mistake, because the set up will not be succeed in this way on most cameras. You must disconnect the HDMI converter and related cables and then do the set up, saved, and then turn off the camera. 2) There is signal output, but the screen is rolling and turning, the reason is that the output of our converter card is PAL signal, the monitor the customer are using needs be able to support PAL signal.

Manufacturer: Hopezone Brand: hopezone Color: C4008 Fpv Camera

Package include: 1 x MJX X600 quadcopter Black 1 X C4008 HD 720P camera 1 X Remote 6 X Spare plades 1 X Charger Cable 1 X Instructions 1 X tool 1 X 7.4V 700mAh LI-poly 1 x Phone holder 1 x Screw driver 1 x Antenna bracket 1 x 4GB memorry card 1 x Hopezone Keychain 1 x Card reader 5 x Screws

Manufacturer: XK Brand: Xk

Specifications: Brand name: XK Model name: K110-B Item type: RC helicopter Color: Orange Material: ABS Blade Diameter: 245mm Body Length: 270mm Tail Rotor Diameter: 36mm Main Motor Type: 1106 brushless motor Tail Motor Type: 0715 brushed motor Gyroscope: Six axis Battery: 3.7V 450mAh 25C li-po Charging Time: About 60 minutes Working Time: 5-7 minutes Item dimension: 270 * 48 * 77mm (with blade) Item weight: 58.5g Battery dimension: 58 * 18 * 4mm Battery weight: 12.1gPackage information: Package size: 29 * 6.8 * 8.6cm / 11.4 * 2.7 * 3.4in Package weight: 280g / 9.9oz Gift box package Notice: This RC model is not suitable for children under 14 years old. Carefully read the instruction before any use, if you are a beginner, it's advisable to be assisted by an experienced adult. Caution for the battery: Don't over-charge, or over-discharge batteries. Don't put it beside the high temperature condition. Don't throw it into fire. Don't throw it into water.Package list: 1 * XK K110-B Helicopter 1 * 3.7V 450mAh 25C li-po Battery 1 * Pair of Spared Blades 1 * Spared Tail Rotor 1 * Spared Main Gear 1 * 2-Port Charger 1 * USB Cable 1 * Cross Screwdriver / Hex Wrench 1 * English Manual

Manufacturer: DYS Brand: DYS

DYS BE1104 4000KV Motor, XM10A ESC, ABS 3020 Prop - F1104 Power Combo Set Included: DYS BE1104 4000kv motor, whole black color - 4 pcs DYS Mini XM10A esc - 4 pcs DYS ABS3020 Prop - 2 pairs

Manufacturer: MICROHELI Brand: Microheli Co.

Manufacturer: Team Black Sheep Brand: Team Blacksheep

Team BlackSheep TBS CORE The TBS CORE is a progression of the revolutionary TBS Power Supply Unit. It supplies a selectable 5V or 12V to video transmitter and camera regardless of input voltage (2S to 10S). The TBS CORE can supply video transmitters with up to 1W (with minor airflow at 1W) of emitted power (EIRP) and a standard FPV camera. We have also built in an optional OSD. In a nutshell, it simplifies FPV setups and is a safety feature every FPV plane should have. No more cutouts due to low voltage, single battery FPV systems prevent you from forgetting to charge spare batteries, the simplified wiring reduces points of failure. Why did we change the name? The TBS CORE is no longer just a power supply unit. For most planes that you do not fly long range, it's the only thing you'll need short of a video camera and a video transmitter. In our view, the TBS CORE sits at the core of your FPV system. That's why we gave it a new name. Installation is quick and easy: solder the TBS CORE between your camera and video transmitter using the supplied cable, the PSU will provide a constant voltage along the full life of your batteries for both camera and transmitter. The redundant input power makes sure you have video signal even if your main battery is completely flat, so you can always locate and recover your plane.