Redcat Racing Caldera SC 10E Brushless Electric Short Course Truck, Blue, 1/10 Scale

Manufacturer: Tamiya America Brand: Tamiya Model: 56302

This Box Trailer can be hitched-up to a 1/14 scale R/C tractor truck. This trailer uses hard-anodized aluminum panels for the utmost durability and realism. Rear gate doors are open-able, just as seen on full-sized trailers.

Manufacturer: Horizon Hobby (US) Brand: ECX Model: ECX03014 Color: Black/White

Engineered to bash harder, drive faster and be more relentless than ever before; the brushless Ruckus comes ready to make your next bash session as epic as possible. With AVC technology installed, you'll have the advantage over larger more expensive rigs right out the box. Using AVC, you can harness the power of an insanely fast Dynamite Tazer 3300Kv 4-Pole Brushless Motor and feel dialed in at any speed. Thanks to waterproof electronics and a full metal gear transmission, the Ruckus is always prepared to cause a commotion. When it comes to hard-hitting durability, the Ruckus was designed to withstand as well as deliver the pulverizing punishment on a grand scale.

Manufacturer: Exceed RC Brand: Exceed RC

The Legion truck platform consists of a shaft driven? 4 wheel-drive system, geared differentials, aluminum upper deck chassis, aluminum drive shaft, metal axes and oil-filled shock absorbers with progressive springs to tame any terrain. The steering mechanism is handled by a high torque servo allowing aggressive all terrain driving. The entire chassis is enclosed in a durable composite roll cage with scale driver and co-pilot included. Dirt, sand, snow, mud, rain, this truck will smash through it all. This truck is ready to run. It includes an Exceed RC 2.4ghz radio control system for optimum driver and machine communications. It also included a 7.2v 1800mah Ni-MH battery and charger. Features: 1. Aggressive off road treaded tires and off-road style wheels 2. Covered spur gear cover 3. Threaded, oil-filled, adjustable shocks 4. 6061-T6 aluminum shock towers 5. Front and rear metal geared differentials 6. Brushed 550 Motor 7. Li-Po compatible Brushed ESC 8. 4WD shaft drivetrain Specifications: Length : 440mm Height : 162mm (body excluded) Width : 255mm Wheel Diameter : 105mm Wheel Width : 60mm Wheel Base : 275mm Weight : 1890g Gear Ratio : 8.133 : 1 Ground Clearance: 33mm Motor: RC550 Servo: 6KG (Waterproof) Battery: Ni-MH 7.2v 1800mah Package Contents: 100% Assembled 1x 1:10 Exceed Truck 1x 2.4Hz Transmitter/Receiver 1x Battery Charger (100-240V) 1x 7.2v 1800mAh Ni-MH battery 1x Instruction Manual Required to Run: 4 AA Batteries for 2.4ghz Transmitter

Manufacturer: Integy Brand: Integy

OVERVIEW: Add some flashy looks to your ride and upgrade performance and durability at the same time with our Alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined, and the aluminum alloy parts are available with an anodized finish in multiple colors to help match your color scheme. NOTE: Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners. Shimming may be required for perfect alignment and fitment. Some parts may require some permanent modification to the vehicle for fitment. Some parts may eliminate certain OEM features. Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. Before installation, please check metal-to-metal fasteners for tightness, and use liquid threadlock when required, as some components are assembled for packaging purposes only. Item T8031ORANGE Barcode: 91789009683

Manufacturer: Hobbico Inc Brand: Team Associated Model: ASCD7038

This is the Associated SC10.2 Factory Team Off-Road Race Truck Kit. With the levels of competition continuously increasing in the short course arena, the genius minds behind the doors of Area 51 knew they would have to push the limits of the SC10 to stay out in front, introducing the all new SC10.2 Factory Team Off-Road Race Truck Kit.The all new Associated SC10.2 Factory Team Kit delivers the next and best level of short course performance that will continue to be proven a winner. Based on the incredibly successful 8-time R.O.A.R. National Champion RC10T4, the all new SC10.2 shares many of the same Factory Team optional parts that result in faster lap times and improved durability. The VTS slipper clutch, Factory Team 12mm 'Big Bore' shocks, and 'Gull Wing' front suspension are just a few of the Associated SC10.2's features that make it stand above the rest of the pack!Includes: One Associated SC10.2 Short Course Factory Team Kit, with Clear Body, Wheels, Shock Oil, Decals, Window Mask Sheet and InstructionsRequires: Radio: 2-channel with high torque steering servoMotor: Brushless recommendedESC: Compatible with selected motorPinion Gear: Compatible with selected motorTires: 1/10 scale short coursePaint, building and track equipment

Manufacturer: Hobbico Inc Brand: Dromida Model: DIDC0061

The Wasteland truck is fast, agile and as rugged as off-road. But what makes it different from any other vehicle is the foam dart launcher. Push the fire control button on your radio and you can send a dart streaking toward a target 10, 20 or even 30 feet away. If you score a hit, nobody gets hurt. If you miss, just reload and try again. The Wasteland truck arrives assembled, mission-ready and complete right down to "AA" radio batteries and three fast-flying foam darts. Perfect for target practice or running battles with friends inside or out!Fully assembled vehicle with:Spring-operated foam dart launcher with 3 dartsTough, factory-painted and decaled truck bodyInstalled M370 motor Rugged, reliable 4WD system for balanced traction and handlingGear differentials for dependable power deliveryBig Bore oil shocks to absorb joltsMounted, high-traction tires with foam inserts for better handlingBig front and rear bumpers to absorb impact energyAdjustable camber rods, shock positions and more for performance-tuningBall bearings for less friction and wear, smoother operation and higher speedsD103 3-channel radio system with:Dependable 2.4GHz technology for interference-free controlSteering and throttle trims to dial-in handlingSteering and throttle dual rates to tailor speed and handling response to your preferenceBattery LED for monitoring voltageServo reversing for setup convenienceWaterproof ESC/receiver with easy, push-button linkingWaterproof dart launcher servo and steering servo with servo saver

Manufacturer: Blade Brand: Blade Model: C-GO1 HD FPV Camera

Introducing the perfect action camera for your RC needs! Whether you are lookingfor a lightweight FPV camera with streaming capabilities that won't interfere with your 2.4GHz radio or just looking for a high quality action camera, the E-Flite C-GO1 is destined to be the #1 choice of modelers everywhere. Not to mention, it's the camera included with the Blade 350 Qx2 AP Combo! Key Features 5.8GHz downlink to support mobile devices with included antenna 1080p/30 recording or 720p/30 when streaming Lightweight and small form factor Low latency and long range Wi-Fi Wide 120deg Angle of View 1920 x 1080 Still Images microSDHC Memory Card Slot 90 Minutes of Use per Charge Lightweight - Small Form Factor

Manufacturer: Tacon Brand: tacon

The Tacon Valor ready to run package also includes a 2.4ghz radio system. With frequency hopping technology, interference is a thing of the past. No longer do you have to worry about your specific channel. The radio system will automatically take care of that for you while you are focused on handling this beast of a machine. Features: 1. Tacon design treaded tires 2. Aluminum-capped, oil-filled, coil-over, 6061-T6 adjustable shocks 3. Thick composite shock towers 4. Front and rear metal gear differentials 5. LiPo Ready ESC 6. 380 Brushed Motor 7. 4WD shaft drivetrain Specifications: Scale: 1/14 Tacon Valor Monster Truck Length: 280mm (11in) Width: 340mm (13.4in) Height: 132mm (5.2in) Wheelbase: 185mm (7.3in) Weight: 0.90kg (1.9lbs with battery) Tire Type: Tacon Monster Truck Chassis: Composite Motor or Engine: 380 Brushed Steering Servo: Solar 655 Gear ratio: 8.23 Speed Control: Brushed Lipo Ready Radio: 2.4GHz Technology Batteries: 7.2V NiMH with 3.5mm gilded round connector, Charger included Shock Type: Aluminum capped, threaded, oil-filled, coil-over Package Contents: 100% Assembled 1x 1:14 Tacon Valor Truck 1x 2CH 2.4Hz Transmitter 1x Battery Charger (100-240V) 1x 7.2v 1100mAh Ni-MH battery 1x Instruction Manual Required to Run: AA Batteries for Transmitter

Manufacturer: HRP Distribution Brand: Team Associated Model: ASC9063

Enter the RC10B44.3 Factory Team Kit, the latest evolution of Team Associated's 1:10 4WD electric off road competition buggy. The most significant changes are found on the new hard-anodized aluminum chassis, which helps lower the center of gravity to improve handling and durability. The chassis has been designed to have symmetrical torsional flex to improve handling consistency, the new floating motor mount, floating servo mount, and chassis machining help to provide the desired flex symmetry. The B44.3's drivetrain has been built up and refined to keep up with the demand of today's high-traction off-road tracks. A set of four precision CVA's transfer the power from the gear differentials via ball bearings throughout the car. Now the B44.3 is even more adaptable to multiple racing conditions with the adjustable weight bias feature. Weight bias can be significantly altered by using either the front motor configuration with a saddle pack or the rear motor configuration with a shorty pack. The B44.3 is also backwards compatible with the previous generation VTS slipper clutch (not included) and ball differentials (not included), making the B44.3 extremely versatile and adaptable to any track condition. Factory Team V2 12mm big bore shocks have improved smoothness, improving suspension travel and increasing overall traction. Lastly, the B44.3 comes with the latest clear JConcepts Finnisher X-Flow body and AE 6.5" high downforce wing. The RC10B44.3 has been given all of the design advantages that only a winning pedigree like Team Associated can provide. If you are ready to take your 1:10 4WD off-road program up to the next level, the B44.3 is ready to take you there! This vehicle needs extra parts to make it operational. RC10B44.3 Factory Team Kit shown equipped with items NOT included in kit: Reedy motor, Reedy battery, Reedy ESC, XP servo, XP receiver, pinion gear, and tires. Body comes clear. Assembly and painting required.