Walkera Receiver RX2637H-D for Master CP RC Helicopter WK825

Manufacturer: GoolRC Brand: GoolRC

Specifications: Brand name: GOOLRC Remote control: 2.4GHz / 4 Channels / mode 2 Camera: 2.0MP HD camera FPV transmission: 5.8G real-time Function: 360° Eversion, CF mode, one key return, up, down, left, right, forward, backward, hovering Remote distance: about 50m Battery for quadcopter: 3.7V 450mAh Lipo Battery Charging time: about 70-90 minutes Working time: 4-5 minutes Battery of remote controller: 3.7V 550mAh Lipo Battery (built-in) Caution for the battery: Don't over-charge, or over-discharge batteries. Don't put it beside the high temperature condition. Don't throw it into fire. Don't throw it into water. Warm tip:  When a flight is finished, it would be better to leave the plane alone to cool down before a next flight, which can better protect the motors. FAQ of the aircraft: 1 The aircraft fail to connect with transmitter. Before binding, make sure battery is full. Then turn on the drone and the transmitter, the time between these two operation should be finished in 2 seconds. 2 One or more motors don't work. Drone should stay on a flat surface during the binding, or motor is damaged. 3 Drone flys to on side dramatically or spins while hovering Please switch off the power of both controller and drone and then match the drone and controller again. 4 Battery problems (can't be charged, swelling, etc). Battery damaged, suggested to change a new one. 5 The aircraft is out of balance (can't fly, deviation, spinning on the ground). Check the propeller is installed in the right way. 6 During the charging, battery and charging cable melt. This USB charger only used for DC current(computer USB port), never connect to AC electric circuit. Pay attention to the charging time, never over charging.

Manufacturer: Wobox Brand: Wobox

Description: 1.FPV RC Quadcopter CF mode:Completely solving pilot "loss of orientation" problems. 2.With protection frame:Protect your quadcopter from collision. 3.Playing Environment:You can play this quadcopter both indoor and outdoor environment. Notice: This RC drone is equipped with coreless DC motors, continuous using with different batteries is not suggested. This RC model is not a toy and is not suitable for children under 14 years old. Carefully read the instruction before any use, if you are a beginner, it's advisable to be assisted by an experienced adult. Mode:H6W Product Size:11*10.5*3.5cm Package Size:18.2*10*16.2cm Charging Time:60 mins Flying time: 7 mins Battery:3.7V 350mAh Package include:Aircraft X 1, Remote Control X 1, Protective Cover X 1, Batter X 1, Fan Blade X 1, Fan Blade Changer X 1, Instructions X 1, USB Charge X 1, Screwdriver X 1.

Manufacturer: WayIn Brand: WayIn Model: JJRC H16,X6

Package Included: 1 x Tarantula X6 Quadcopter, 1 x LCD Transmitter, 1 x English Manual, 1 x Balance Charger, 4 x Propeller, 1 x Screwdriver, 1 x 7.4V 1200mAh Li - Po Battery

Manufacturer: Haktoys Brand: Haktoys

Specifications and Features Quadcopter dimensions: 13 x 13 x 3 inches, Diagonal Length: 17 inches Package dimensions: 21 x 15 x 3.9 inches Optimum charge time: 60-70 minutes, flight time: 6-8 minutes, flight range: Up to 350 feet Powered by built-in 3.7V 600mAh Rechargeable Li-Po Battery Real time video, First person view, record video with camera Android and Apple IOS mobile phones are applicable, app is available for download and installation Fuel Source: Electric, State of Assembly: Ready-to-Go 4 Channels: forward, backward, up, down, clockwise, anti-clockwise, left cyclic, right cyclic 6 axis built-in gyroscope with auto stabilization, Loop function (360° eversion), 2 speed modes Recyclable materials, ROHS, PB-free, CE, ASTM, FCC compliant For ages 14+ Additional Remarks Allow a short break after each landing and let the battery cool off for a few minutes between flights. This will help prevent motor and circuit board failures. For extra flight time, spare batteries are available separately. Package Contents 1 x HAK908F FPV RC Quadcopter with built-in 3.7V 600mAh Rechargeable Li-Po Battery 1 x 2.4GHz Remote Control 1 x Mobile Phone Holder 1 x USB Charger 2 x Spare Main A Blades 2 x Spare Main B Blades 1 x Screwdriver 1 x Instructions Manual 1 x FPV installation manual 6 x 1.5V AA batteries for Remote Control (NOT Included) Why HAK Toys? HAK Toys stands by every product it offers, and it would never offer a product that does not pass HAK Toys' strict quality measurements. This means that HAK Toys' quality is top-notch. If the product does not meet your expectations, we will make it right - guaranteed!

Manufacturer: Rakon Heli Co., Ltd. Brand: Rakon

Rakon Blade 230S / 250CFX CNC Head Combo 02 (Blue) - 230S012-B Included:1 x (SKU: 230S010) CNC AL Main Rotor Hub Set ($24.99)1 x (SKU: 230S030) CNC AL Main Blade Grip Set ($27.99)1 x (SKU: 230S178) CNC AL Swashplate Set ($29.99)

Manufacturer: Venom Group International Brand: Steerix Model: 6057

Fun - filled Radio - controlled Venom Ozone Elite Helicopter, SAVE BIG! Take the controls, you're in the pilot seat! Striking Venom is easy to fly indoors or out, thanks to a counter-rotating rotor offering extreme stability. Also features a built-in gyro for tops in maneuverability and control. Flip a switch for a functional LED light and multi-colored LED boom lights. Precise and powerful, this Venom is ready to ship to your hangar at a bargain price for BIG BUCKS OFF original retail! Land yours! Ready to fly: 3.5 channel, 27 MHz transmitter for flying ease; Coaxial counter-rotating blades cancel out rotational torque for smooth stability; Rechargeable Li-poly battery pack; Working LED lights; Requires 4 AA transmitter batteries (not included). Has 120V charger with AC adaptor and 4 1/2'l. cord, plus set of extra blades. 10 7/8 x 2 1/4 x 5 3/4"h. 10" rotor span. Set: 15 ozs. Helicopter: 4 ozs. For ages 14 and up.; CHOKING HAZARD. Small parts. Not for children under 3 yrs. Order Today! Radio-controlled Venom Ozone Elite Helicopter

Manufacturer: Shaluoman Brand: Shaluoman

Package Included: 1 x Mini CC3D Revolution Filght Controller 1 x OP GPS 1 x OSD 1 x OPlink mini Air Module 433MHz 1 x OPlink mini Grond Module 433MHz 1 x Distribution Board

Manufacturer: Safstar Brand: Safstar Color: White

Features: 6 AXIS GYRO Equipped with the latest 6-axis flight control systems, 3D lock, More scheduled flight, operating more to the force 360°Eversion A key 360°roll,continuous roll for perfect action and wonderful performance Headless Mode In headless state, the operator has no need to recognize the position of aircraff's headpiece, and he just needs to control the aircraff in accordance with the direction of remote control's operating rod HD Cam Equipment X8C equipped with HD camseras, let you control the drone enjoy taking pictures/videos of the pleasure flights Blade protector Highly elastic plastic protective circle, preventing the blades in flight Cause wear, anti-collision anti-fall performance further enhanced Colorful flashing lights Colorful flashing light, keep your Aircraft at night Flying is quite excellent Specifications: Helicopter Size: 19 x 19 x 7.4 inches(l x w x h) Box Size: 29 x 13.8 x 5.1 inches(l x w x h) Helicopter battery: 7.4V 1800 mAh Li-polymer battery Controller battery: 4*1.5V AA Battery (not included) Built-in camera: Yes Frequency: 2.4GHz Channel: 4CH 6 Axis Gyro Charging time: about 200 minutes (USB Charging) Flying time: about 7-8 minutes Control distance: up to 50 meters Real-time shooting funtion: Yes Headless mode: Yes Package includes: 1 x Syma X8C Quadcopter1 x 2.4G Remote Controller1 x Camera4 x Landing Gears 4 x Protection Frame 1 x USB Charging Cable 1 x 7.4V 2000mAh Li-on Battery 1 x Phone Holder 1 x Screwdriver 1 x User Manual

Manufacturer: Rakon Heli Co., Ltd. Brand: Rakon

Rakon CNC AL and CF Center Main Frame Set Sky-Hero Anakin 1. Description:- Material: Aluminum alloy, 3K Pure Carbon Fiber. - Hardware: Stainless Steel.- Compatible and replacement the stock frame.- Optimized for weight and durability. 2. Usage:- Use for Sky-Hero Anakin. 3. Weight:- Stock Center Main Frame Set: 57.63(g) = 2.03(oz). - CNC AL and CF Center Main Frame Set: 57.03(g) = 2.01(oz). 4. Package Included: - CNC AL and CF Center Main Frame (1set).