Air Hogs RC Gyroblade, Blue/Red 3 Channel Helicopter

Manufacturer: Syma Brand: Xiaomax

Main Features: 1.6-Axis Gyro stabilization system makes the helicopter more stable and flexible when flying. 2.It has the characteristics of wind-resistant and can be field indoor or outdoor 3.Modular design structure is applied, easier to assemble and convenient for maintain 360 degree version and throwing flight function. 4.HD Camera Left / Right hand throttle mode can be changed by the transmitter Specification: Control Mode: Remote Control Frequency ：2.4 HGz Product Dimensions :31.5 X 31.5 X 7.5CM Video Pixel : 2000000 Battery for RC Quad Copter: 3.7V 500mAh LiPO Battery Charging Mode: USB charging Charging Time: About 100 mins Play Time: About 6-8 mins Remote Control Battery ：4 "AA" battery Includes: 1 x Syma X5C-1 RC Quad Copter 1 x Remote Controller (does not include 1.5v AA batteries) 1 x USB charging cable 4 x Red Rotating blades 4 x Blue Rotating blades 1 x 4G Card 1 x Screwdriver 2 x 600mAh LiPO battery 1 x User Manual Site Selection: Try to choose a relatively open and widen place, no obstruction of flat ground (except indoor small aircraft).It is more ideal if the lawn . Note: Please be aware that the tape seal was cut by us to examine the quadcopter quality and to see if it can fly normal. For better flying experience we suggest you prepare some extra batteries. Quality Guarantee A full, 100% quality guarantee. If the product have any problems within the period of warranty, just email us stating the situation, and you will receive a courteous and prompt response within 24 hours. Keep kids away from computers, ipads, phones and so on. Let them go outside ,broaden their horizon, and give them a healthy and beautiful future.

Manufacturer: SVP Brand: Egofly Model: LT-712-BK Color: BLACK

The SVP Egofly Hawkspy LT-712 R/C Helicopter is suitable for all ages but recommended for 14 and over. It has a built-in color digital video camera with 640x480 pixels camera resolution. The original package includes a 1GB Micro SD card for the camera. The metal structure provides increased strength and stability. Helicopter can be used in both indoor and outdoor setting. It flies all directions, up/down, forward/backward, rotates left/right; has a 3.5 channel control and 360° definite direction with built-in solid-state gyro. It is rechargeable with the charger included but batteries are not included. NOTE: Returns accepted only if in unopened boxes and new condition.

Manufacturer: CZXin Brand: CZxin

Package Included: 4 x brushless motor (CW CCW)

Manufacturer: ImmersionRC Brand: ImmersionRC

ImmersionRC's newest version (4.1) of their popular 5.8GHz diversity receiver, the DUO5800 V4 now with 40ch including RaceBand. This receiver includes the popular Fatshark/ImmersionRC 'NexWaveRF' series of A/V frequencies + 7 RaceBand channels and now also includes an additional 24ch for 5.8GHz. Now 1 receiver can cover all 5.8GHz frequencies. The diversity receiver system automatically chooses the best signal reception between the two internal receivers, giving you the best picture possible. A/V receiver with diversity antenna inputs GS-Link (Groundstation Link) for direct single-cable connection to the ImmersionRC Groundstation (soon to be released) >-90dBm typical sensitivity (using NexWaveRF module technology) SMA female antenna connectors, compatible with standard 5.8GHz antennas (omni or directional) Compatible with 'DC Short' antennas (such as the Cloverleaf, and SPW) Frequencies: 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz as standard, with 32 channel mode supporting most competitor's transmitters. Audible Low-battery alarm, Duo5800v4 uses a switching regulator for lower power consumption, and runs much cooler Inputs filtered against nearby 2.4GHz and UHF R/C radios. Input voltage 6-16V DC (2.1mm plug, center pin positive) Ships with 2 x antennas (3dBi 5.8Ghz omni-directional) 2 x 30cm RCA AV cables (3.5mm 4-POL to 3xCinch) 1 x 1m DC Power cable (open ends) Standard Frequencies : IRC/FatShark: 5740, 5760, 5780, 5800, 5820, 5840, 5860 (all within the legal ISM band) IRC RaceBand: 5685, 5695, 5732, 5769, 5806, 5843, 5880, 5917 MHz (legal for Ham use in USA) Extra frequencies : E Band: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945 B Band: 5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866 A Band: 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725

Manufacturer: 0 Brand: Unknown Model: 231 UA6

UDI Adapter for iPhone and Android Controlled RC Helicopter

Manufacturer: Z-Standby Brand: Generic Model: Q13586-A

Package Content: 1Pcs of CC3D Atom Flight Controller 1Pcs x 8 Pin Cable 1Pcs x 4 Pin Cable 1Set of V-Type Antenna Pedestal 1Set of Anti-Vibration Damper Set 4Pcs of Simonk 12A ESC 2Pcs of MT2204 2300KV CW Motor 2Pcs of MT2204 2300KV CCW Motor This CC3D Atom Is About Half the Size of the Regular Openpilot CC3D, But with the Same Functionality. Now You Can Get All the Great Features and Functionality of the Full Sized CC3D Flight Controller Board But At About 1/2 the Size! Features: the CC3D Provides a Crisp Feel When Flying Tricopters, Quads, Hexas, Octocopters, and Even Fixed Wing Planes. Powerful STM32 32-Bit Micro-Controller Running At 90Mips with 128KB Flash and 20KB RAM. 3-Axis High-Performance Mems Gyros and 3-Axis High-Performance Mems Accelerometer. 4 Layer PCB For Superior Electrical Noise Reduction and Flight Performance. Software Support For Windows, Mac and Linux. Direct High Speed USB Support with No Drivers Required. Spektrum Satellite Receiver Support. Futaba S-BUS Hardware Support. Innovative Flexi-Port Technology For Superior Port Flexibility. 4Mbits On-Board EEPROM For Configuration Storage. This Openpilot CC3D Atom Board Also Includes a High Quality, Protective Case. Optional Straight and Bent Pin 12A Simonk Speed Controller Specifications: - Continuous Current: 12A - Burst Current (10S): 15A - Li-Xx Battery (Cell): 2-3 - Dimension (L*W*H): 25mm x 20mm x 7mm - Weight Wires Included: 9 - BEC Mode: Linear - BEC Output: 1A/5V

Manufacturer: Double Horse Brand: Double Horse

Double Horse R/C Helicopter 9117

Manufacturer: QWinOut Brand: Qwinout

Attn: Customer Needs To Set HDMI Resolution To Auto On Camera, This Device May Not Support Those Cameras That Don't Have The Function Of Auto HDMI Resolution, As Soon As Auto HDMI Resolution Is Set Up, You Must Turn Off The Camera And Restart It, The Set Up Will Take Effect Finally. PAL and NTSC Will Do Nothing With The Converter, Only Resolution Ratio Will Influence Its Output. User Can Do DIY with Old Earphone Cables. for Those Customers Who Don't Need The Audio Track(Channel), It Would Be OK for Only Bringing Out GND and Video. VIDEO Output Resolution: 720*576 PAL    1) Most Importantly, Don't Connect The Converter or Any Cable to The Camera Before The Process. Set Up HDMI Resolution to Auto, Saved, Then Quit The Set Up Menu, and Turn off The Camera. 2) Connect The HDMI Converter or The Related Cable, Turn On The Camera, It Will Work Normally. 3) If No Image Is Appeared, Please Check and See If The Resolution Set up is On "Auto" State, That Is to Say, We Need to Check Whether The Step One is Completed and Saved or Not, and Then Start Working. If it Still Does Not Working, Please Repeat The Step 1). 4) For Those Very Special And Few Versions Of Cameras, According To Our Experience, Those Sony Cameras Sold In France, Needs To Set Up Pal, The Reason May Be Related With Its Firmware. The several possibilities for problem of no image: 1) Many customers normally would like to connect the converter with the camera first and then set up AUTO resolution, it is a mistake, because the set up will not be succeed in this way on most cameras. You must disconnect the HDMI converter and related cables and then do the set up, saved, and then turn off the camera. 2) There is signal output, but the screen is rolling and turning, the reason is that the output of our converter card is PAL signal, the monitor the customer are using needs be able to support PAL signal.

Manufacturer: Hopezone Brand: hopezone Color: C4008 Fpv Camera

Package include: 1 x MJX X600 quadcopter Black 1 X C4008 HD 720P camera 1 X Remote 6 X Spare plades 1 X Charger Cable 1 X Instructions 1 X tool 1 X 7.4V 700mAh LI-poly 1 x Phone holder 1 x Screw driver 1 x Antenna bracket 1 x 4GB memorry card 1 x Hopezone Keychain 1 x Card reader 5 x Screws