RC Drones - Page 117

Manufacturer: ESTES Brand: Estes

EST1799 1799 Make It Take It E2X (25)

Manufacturer: GoolRC Brand: GoolRC Color: Green

Descriptions: WL MODEL airplanes come complete with everything you need for asuccessful first flight in one box-airplane, radio control transmitter,battery and charger. And there's almost no assembly needed. In fact, you can have a WL MODEL plane flight-ready in less time than it will take you to charge the battery.Features: Three-channel backward pusher glider, the whole set is made from EPO, strong impact resistance. Easy to control, steady flight, suit for beginner. Folding propeller can be putted away when gliding, smaller resistance. Coming with high discharge rate. Function: UP/Down/Forward/Turn left/Turn right/360°Turn. Can be upgraded to video taking version(Camera module should bought in additon).Specifications: Brand: Wltoys Item No: F959 Color: Red/Blue Optional Item Name: Wltoys F959 2.4Ghz 3CH RC Airplane Sky King Material: EPO Wingspan: 750mm Overall length: 565mm Net weight: 100g Flying time: about 15 minutes Charging time: 30-40 minutes Frequency: 2.4G Control distance: 200 meters Driving motor: N60 Airplane battery: 7.4V 300mAh (included) Transmitter battery: 4 * 1.5V AA (not included) Package size: 57.5 * 26.5 * 14cm / 22.6 * 10.4 * 5.5in Package weight: 1036g / 2.3lbPackage list: 1 * Wltoys F959 Body 1 * Left wing 1 * Right wing 1 * Wing spar 1 * 7.4V 300mAh lipo battery 1 * Transmitter(mode 2,left hand throttle) 1 * Power adaptor & Charger 1 * Camera base 1 * English user manual

Manufacturer: Audley (Domestic) Brand: SkyRover Model: TTYW857206C-2

Experience ultimate flight control with the SKY ROVER Hexa 6.0 Drone, a 6 axis drone with multi-directional navigation. 12 ways to fly! Impress your friends with a cool flip and roll stunt and watch the LEDs illuminate during flight. Turn on the camera to shoot footage from the sky and then download onto your computer to share your sights. Designed for outdoor use.

Manufacturer: CreaTion Brand: Creation

Good Quality Backpack, Heavy Duty&Water Proof, High Recommend for Professional Player. Package Include: 1 x DJI hard shell backpack

Manufacturer: MTROIZ new Brand: BYROBOT Model: DF-GX-101

The Drone Fighter is controlled using a traditional-looking remote control, with which it communicates using Zigbee. There are several different control modes, including "absolute" (easier) and "relative" (to the drone, like a typical RC helicopter) orientation, as well as beginner and expert modes. Remove the rotor guards in expert mode to cut down on the weight, and you can even do 360 flips! The Drone Fighter is, in fact, capable of fighting. It has Infrared transmitters and receivers on it, so if you have two or more, you can assign them to different teams. If your Drone Fighter is "hit" by an Infrared shot, its LEDs flash and your controller vibrates in your hands. Get hit six times, and the game is over. (There's lots more-- shields, bombs, accumulating totals, etc.)The remote control is compatible with a downloadable Windows application that serves both as a flight simulator and trainer and to update the controller firmware. Complete instructions are in the box.

Manufacturer: Meiego

General Specs Brand WL TOYS Model S215 Type Controlled by iPhone / iPad / iPod / iTouch Color Black Channel 3.5 channel Camera 0.3 MP Gyroscope Yes Photo Capture Yes Accelerator Switch Yes TF Card Supported Yes (512MB TF card) LED Light Yes Package Details Weight: 315.65 g Size: 25.5*18*7.5 cm Package Includes * RC Helicopter * USB Cable * Main Blade * Tail Blade * Screwdriver

Manufacturer: R/C ELECTRONICS Brand: R/C ELECTRONICS Model: RELP0100

This is the RC Electronics Watts Up Watt Meter with Blue Case.FEATURES: Works with any electric airplane, helicopter, car or boat model High resolution on all measurement ranges to accurately check battery battery pack cell balance and measure single cell packs Connects like jumper cables and troubleshoots poor performance, crashes, charging problems, battery capacity, ruined batteries, erratic receiver and servo operation and many other common electric model problems Readings are easily reset, even without removing power, by adding an external pushbutton connected to the reset signal of the meter's auxilliary connector, The full user manual (v1.7) at the RC electronics has details on this function. Sets cutoff currents and voltages, compares components and detects wear prior to component's failure Measures eight essential electrical values; Captures Peak Amps, Peak Watts and Minimum Volts events as short as a fraction of a second Current: 0-100A Peak, 50A Continuous, .01A Resolution Charge: 0-65535mAh, 1mAh resolution Power: 0-6500 Watts, .1W Resolution Voltage: 4-60V, .01 Resolution (0V min. using auxiliary receiver battery Energy: 0-6500 Watt Hours, .1Wh resolution Powered by circuit-no battery to change 16 character, 2 row LCD display 8 MIPS microprocessor and DSP firmware for highest performance One year warrantyINCLUDES: RC Electronics Watts Up Watt Meter, fo

Manufacturer: ALIGN Brand: Align/T-Rex Helicopters Model: HSD43001

Instruction: ●Suitable for T-REX 450 series. ●Faster speed with high torque performance, allowing helicopter to perform with faster and higher precision. ●Along with double bearing support, resulting in minimal dead-band of gear and better longevity. ●High rigidity, shock resistant metal gears with high strength composite alloy gears with durable structure characteristics. ●Aluminum alloy mid case construction for instantaneous heat dissipation, maintaining servo's high efficiency. ●Supports digital & analog control signal. ●Powerful and precise servo, suitable for T-Rex 250/450 CCPM cyclic use. Specification: ●Stall torque:2.3kgcm（4.8V） ●Stall torque:2.9kg.cm（6.0V） ●Motion speed:0.095sec/60°（4.8V） ●Motion speed:0.08sec/60°（6.0V ●Rating voltage:DC 4.8-6V ●Temperature range:-20°C~+60°C ●Dimension:22.8 x 12 x 25.4mm ●Weight:15g ●1520μs standard band Accessories: ●Servo rudder piece x 2 ●Set screw x 1 ●Tapping screw for servo x 2

Manufacturer: CCP Brand: CCP Model: 84729-WH

This item is Brand new & factory sealed.

Manufacturer: Rakon Heli Co., Ltd. Brand: Rakon

Rakon Blade 200QX CNC Advanced Upgrade Kit 01 (Orange) - 200QX980-O 1. Description:- The CNC Advanced Upgrade Kit 01 can use with Stock Plastic Landing Gear or RKH's CNC AL Landing Gear Set (SKU: 200QX721).- Aluminum, Carbon Fiber, Delrin Material and Steel Hardware.- Optimized for weight and durability. 2. Usage:- Use for Blade 200 QX. 3. Weight:- CNC Advanced Upgrade Kit 01: 44.12(g) = 1.60(oz). 4. Included: - CNC Advanced Upgrade Kit 01 (1set). 5. Discuss: https://www.facebook.com/groups/1431147893857468