Manufacturer: CreaTion
Brand: Creation
Specifications: Item name: X5HW Item type: RC Quadcopter Material: ABS Colour: silver Remote control: 2.4GHz / 4 Channels / mode 2 Gyroscope: Six axis Motor: Coreless motor Camera: 0.3 MP HD camera FPV transmission: wifi real-time Function: 360 Eversion, CF mode, up, down, left, right, forward, backward, hovering Remote distance: about 30-50m Battery for quadcopter: 3.7V 500mAh li-po Charging time: about 130 minutes Working time: 5-7 minutes Battery of remote controller: 4 * AA Battery (not included) Package list: 1 * SYMA X5HW RC Quadcopter 1 * Transmitter (mode 2) 6 * 3.7V 500mAh Li-po Battery 1 * 0.3 MP HD Camera 2 * Pair of Spare Propellers 4 * Protective Guard Ring 4 * Landing Gear 1 * USB Charging Cable 1 * 2GB SD Card 1 * Phone Retaining Clip 1 * Screwdriver 1 * English Manual FAQ of the aircraft: 1. The aircraft fail to connect with transmitter. Before binding, make sure battery is full. Then turn on the drone and the transmitter, the time between these two operation should be finished in 2 seconds. 2. One or more motors don't work. Drone should stay on a flat surface during the binding, or motor is damaged. 3. Battery problems (can't be charged, swelling, etc). Battery damaged, suggested to change a new one. 4. Accessories missing. Check gift box package inside and outside carefully. Contact custom service. 5. The aircraft is out of balance (can't fly, deviation, spinning on the ground). Check the propeller is installed in the right way. 6. During the charging, battery and charging cable melt. This USB charger only used for DC current(computer USB port), never connect to AC electric circuit. Besides, pay attention to the charging time, never over charging.